Hard Disk Partitioning in linux

Hard Disk Partitioning
fdisk usage
fdisk is started by typing (as root) fdisk device at the command prompt. device might be something like /dev/hda or /dev/sda. The basic fdisk commands you need are:
p print the partition table
n create a new partition
d delete a partition
q quit without saving changes
w write the new partition table and exit
Changes you make to the partition table do not take effect until you issue the write (w) command.

Example:
fdisk /dev/hda

The number of cylinders for this disk is set to 9729.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)

Command (m for help):n
Command action
l logical (5 or over)
p primary partition (1-4)
l
First cylinder (5200-5222, default 5200):
Using default value 5200
Last cylinder or +size or +sizeM or +sizeK (5200-5222, default 5222): +100M
Command (m for help): t
Partition number (1-9): 9
Hex code (type L to list codes):
0 Empty 1c Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid
1 FAT12 1e Hidden W95 FAT1 75 PC/IX be Solaris boot
2 XENIX root 24 NEC DOS 80 Old Minix c1 DRDOS/sec (FAT-
3 XENIX usr 39 Plan 9 81 Minix / old Lin c4 DRDOS/sec (FAT-
4 FAT16 <32M 3c PartitionMagic 82 Linux swap c6 DRDOS/sec (FAT-
5 Extended 40 Venix 80286 83 Linux c7 Syrinx
6 FAT16 41 PPC PReP Boot 84 OS/2 hidden C: da Non-FS data
7 HPFS/NTFS 42 SFS 85 Linux extended db CP/M / CTOS / .
8 AIX 4d QNX4.x 86 NTFS volume set de Dell Utility
9 AIX bootable 4e QNX4.x 2nd part 87 NTFS volume set df BootIt
a OS/2 Boot Manag 4f QNX4.x 3rd part 8e Linux LVM e1 DOS access
b W95 FAT32 50 OnTrack DM 93 Amoeba e3 DOS R/O
c W95 FAT32 (LBA) 51 OnTrack DM6 Aux 94 Amoeba BBT e4 SpeedStor
e W95 FAT16 (LBA) 52 CP/M 9f BSD/OS eb BeOS fs
f W95 Ext'd (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi ee EFI GPT
10 OPUS 54 OnTrackDM6 a5 FreeBSD ef EFI (FAT-12/16/
11 Hidden FAT12 55 EZ-Drive a6 OpenBSD f0 Linux/PA-RISC b
12 Compaq diagnost 56 Golden Bow a7 NeXTSTEP f1 SpeedStor
14 Hidden FAT16 <3 5c Priam Edisk a8 Darwin UFS f4 SpeedStor
16 Hidden FAT16 61 SpeedStor a9 NetBSD f2 DOS secondary
17 Hidden HPFS/NTF 63 GNU HURD or Sys ab Darwin boot fd Linux raid auto
18 AST SmartSleep 64 Novell Netware b7 BSDI fs fe LANstep
1b Hidden W95 FAT3 65 Novell Netware b8 BSDI swap ff BBT

Hex code (type L to list codes): 83

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
Implementing partition changes without reboot.
[root@free4pk ~]# partprobe

Note: We can create four primary partition at max, If we want to create more than 4 then we will have to create extended and then logical in the extended.

Creating FileSystem

mkfs -t ext3 /dev/hda9
mke2fs 1.35 (28-Feb-2004)
max_blocks 106893312, rsv_groups = 13049, rsv_gdb = 256
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
26104 inodes, 104388 blocks
5219 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
13 block groups
8192 blocks per group, 8192 fragments per group
2008 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729

Writing inode tables: done
inode.i_blocks = 3074, i_size = 67383296
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.

mkfs -t ext3 partition name, will create file system on newly created partition.
mke2fs -j /dev/hda9 , this command will also create the file system on partition.